Shanghai Weixuan Industrial Co.,Ltd
Shanghai Weixuan Industrial Co.,Ltd Only not perfect products,no captious customers because of customers,so will be better
Add to Cart
New Features:
1. Full intelligent control, humidity adjustable.
2. Embedded portable cover plate, easy to repair and clean, can be artificially added water
3. Dry and wet separation design, independent electronic control system, operation is more secure and reliable.
4. Humidity control, timing control, switch control can be chosen in a variety of ways.
5. The machine adopts the anti-burn and anti-corrosion design, which is very sage and durable.
Technical data
| Model | WX35 |
| BTU | 11900 |
| Voltage /Cycle | 220VAC/50Hz |
| compressor consumption | 1.4KW |
| Air flow | 470m³/h |
| Refrigerant | R410A |
| Noise | 50-55db |
| Working temperature | 18-45℃ |
| Size | 450 * 510 *1100mm |
| Weight | 60kg |
| Outlet pipe | 1 |
Maintenance:
There are two fi lters in the unit. The evaporator fi lter is located at the front of the unit. The condenser fi lter is located at the side of the unit.
1. loosen up 2 bolts on the front fi lter guard.
2. Slide fi lter up and use a vacuum cleaner to remove the dust from the fi lter.
3. Dry the fi lter in a shaded area before replacing it. Do not operate the unit without the fi lter installed and the fi lter guard in the closed position.
4. Replace the clean fi lter and close the fi lter guard.
5. To clean the condenser fi lter, lift up on the side fi lter from the middle bar slightly and then angle the fi lter outwards from the bottom and remove.