8500w Portable Spot Coolers 28900btu Cooling Capacity Anti Freezing Thermostat

Purchase instructions

1. This product is industrial cooling air conditioning equipment, non-domestic products.
2. This product is a local cooling air conditioning equipment, cooling and cooling on the same machine, different from the traditional home split air conditioner.
3. The design and use environment of this product is 18-45°C. Below or above this temperature range, the equipment cannot operate normally, and the non-product itself is faulty.
4. The noise of this product is 60-70 decibels, which is not suitable for occasions where noise is required (such as bedrooms, conference rooms, offices, libraries, etc.).
5, before purchase, please confirm the product parameters, including product voltage, frequency, size, weight, air volume, cooling capacity, etc. have been marked in the product, please check carefully.

Features

• Models for outdoor exhaust: Can be connected to outdoor by using the separately sold exhausted duct.
• Compact: Compact design without worrying about the placement area.
• Super compact: Super compact design, with a placement area of 0.168m²
• Little Drain: Up-to-date structure integrated with heat exchanger Significant decrease in drain
• Snug to wall: Can be placed close to the wall on three sides.
• Air filter: Easy-to-clean air filter.
• Durable filter: Large surface area, with no necessary to be frequently maintained.
• Built-in auto swing mechanism: An auto swing mechanism is built in the unit.
• No swing mechanism
• Exhaust duct: Can blow the hot air from the outlet upward.

Maintenance

These portable ac systems are preferred because of their convenience and efficiency. The condenser fi lter is located at the side of the unit.
1. Slide fi lter up and use a vacuum cleaner to remove the dust from the fi lter.
2. If the fi lter is heavily covered with dust and dirt, warm water and mild soap or neutral detergent may be used to wash the fi lter. Do not use any other chemicals to clean fi lter, as they will likely damage the fi lter.
3. Dry the fi lter in a shaded area before replacing it. Do not operate the unit without the fi lter installed and the fi lter guard in the closed position.
4. To replace the condenser fi lter, place the top of the fi lter in the guide and slide the fi lter up until the bottom of the fi lter clears the frame. Then push the bottom of fi lter into the guide and let fi lter gently fall inside the guide. NOTE: For effective cooling clean the fi lter at least every two weeks.